Smart Security 
Ask about this on WhatsApp
Fibaro Flood Sensor
Product code 0104
Sh 250,000.00
In stock in Dar es Salaam
In stock
- Genuine stock. Sourced from authorised distributors, warranty intact.
- Delivered across Tanzania with additional delivery charges.
- Multiple payment options.
How do I pay?
- Cash on delivery — Dar es Salaam only. Pay the rider when it reaches you. Outside Dar es Salaam we ask for payment before we send it.
- Lipa number. M-Pesa, Mixx by Yas (Tigo Pesa), Airtel Money or Halopesa. Message us on WhatsApp and we will send you the number.
- Card — being set up. We are putting card payments in place now, including Apple Pay and Google Pay. Until that is live, please use cash on delivery or a Lipa number.
- VisaVISA
- Mastercard
- American ExpressAMEX
- DiscoverDISC
- Diners Club
- JCB
- UnionPay
- Apple PayPay
- Google PayGPay
Card payments are not switched on yet.
Water
Alarm the moment it reaches the contacts
-20 to +100 C
Temperature sensor
Tilt alarm
Knows if it is moved
2.5 years
On one CR123A
Relay output
Wire it into an existing panel
About this product
A Z-Wave water leak detector that sits on the floor. The contacts underneath close the moment water reaches them and the hub is told at once, which is the difference between a wet corner and a ruined room.
It reports more than water. A temperature sensor reads from -20 to +100 degrees, and an accelerometer raises an alarm if the sensor is moved or tilted, so you know if it has been picked up or kicked aside.
Where the water will show up somewhere the sensor cannot sit, the contacts can be extended on a wire and the body left dry and visible. There is also a relay output on the terminals, so the same sensor can be wired into a conventional alarm panel as well as reporting over Z-Wave.
It runs on a CR123A battery, up to two and a half years, or on 12 to 24 V DC where there is power to hand. A Z-Wave hub is required.
Description supplied by the manufacturer.
Specifications
| Model | Fibaro Flood Sensor |
|---|---|
| Detects | Water at the floor contacts, tilt or movement, temperature |
| Temperature range | -20 to +100 degrees C |
| Extension | Contacts can be extended on a wire |
| Output terminal | 40 V AC or DC maximum, 25 mA maximum |
| Power | CR123A battery, up to 2.5 years |
| External power | 12 to 24 V DC |
| Dimensions | 72 mm across, 28 mm high |
| Radio | Z-Wave Plus |
| Placement | Floor or wall |
| Hub | Required. A Z-Wave controller. |
| Product code | 0104 |
| Category | Smart Security |
| Availability | In stock in Dar es Salaam |
What’s in the box
Not yet defined.
We are still collecting box contents from the manufacturers. Ask us on WhatsApp and we will open one on the shelf and tell you exactly what is inside.
Questions
Do I need a hub?
Yes. It speaks Z-Wave only.
Where should it go?
On the floor at the lowest point near whatever can leak: under the sink, beside the washing machine, at the water heater, in the plant room.
Can it shut the water off?
Not on its own. The hub can, if you also fit a motorised valve. Ask us what we have.
What if the water appears somewhere the sensor will not fit?
The contacts extend on a wire. The probe goes in the tight spot and the sensor body sits somewhere dry where you can see the LED.
Can it drive my old alarm panel?
Yes. It has a relay output rated 40 V and 25 mA maximum, so it can close a zone on a conventional panel at the same time as reporting to the hub.
Anything else? Ask us on WhatsApp and we will tell you straight.
From the same shelf
All Smart Security →You might also want
