SmartHome, your home on autopilot
Shop by category
Not sure what you need? Ask us on WhatsApp
Fibaro Double Switch 2 Z-Wave relay module
Smart Relays
FIBARO

FIBARO Double Switch 2 FGS-223 Relay Switch

Product code 0040
Sh 230,000.00
In stock in Dar es Salaam

In stock

Ask about this on WhatsApp
  • Genuine stock. Sourced from authorised distributors, warranty intact.
  • Delivered across Tanzania with additional delivery charges.
  • Multiple payment options.
Payment Options
  • Cash on Delivery. You can pay cash at our store on pickup, or pay the rider upon delivery (Dar es Salaam only).
  • Pay by Lipa Number
    • M-Pesa
    • Mixx by Yas
    • Airtel Money
    • Halopesa
    • Selcom
  • Pay by Card
    • Visa
    • Mastercard
    • American Express
    • Discover
    • UnionPay
  • Pay by Apple Pay or Google Pay
    • Apple Pay
    • Google Pay
2 Independently metered channels
10 A Maximum total IEC load
60 mm Minimum switch box depth
40 m Indoor wireless range
Z-Wave Plus Mesh network protocol

About this product

Dual Circuit In-Wall Control

The FIBARO Double Switch 2 (model FGS-223) installs inside an in-wall switch box to control two separate electrical circuits independently. Each channel includes built-in active power and energy metering, allowing you to monitor power draw in Watts and track total consumption in kilowatt-hours.

Z-Wave Gateway Integration

This module communicates using the Z-Wave protocol with a 500 series chip and supports AES-128 encryption. A compatible Z-Wave or Z-Wave Plus gateway or controller is required for remote operation and automation schedules. As a mains-powered device, it also functions as a Z-Wave network repeater to strengthen signal transmission across your smart home system.

Electrical Load Ratings

Operating on 100 to 240 V AC at 50/60 Hz, the Double Switch 2 is rated under IEC standards for up to 6.5 A per channel with an overall maximum load of 10 A. Under UL standards, it supports up to 6 A per channel with an overall maximum of 9.5 A. Supported loads include conventional incandescent lighting, halogen lighting, and appliances within specified current limits. This switch provides on and off control and does not support dimming.

Installation Requirements

Installation must be performed by a qualified electrician. The module requires a wall switch box with a minimum depth of 60 mm and must be protected by an external fuse or circuit breaker of 10 A or lower. The wire run between the module and physical control switches must not exceed 10 meters. The device is compatible with momentary, toggle, and three-way physical switches.

Description supplied by the manufacturer.

Specifications

Model NumberFGS-223
Power Supply100-240V AC, 50/60 Hz
Rated Load Current (IEC)6.5 A per channel, 10 A overall
Rated Load Current (UL)6 A per channel, 9.5 A overall
Radio ProtocolZ-Wave (500 series chip)
Wireless RangeUp to 50 m outdoors, up to 40 m indoors
Switch Box Depth RequirementMinimum 60 mm
Maximum Switch Wire Length10 m
Overcurrent ProtectionMaximum 10 A fuse required
Operating Temperature0 to 35 C
Dimensions42.5 x 38.25 x 20.3 mm
Product code0040
CategorySmart Relays
AvailabilityIn stock in Dar es Salaam

What’s in the box

Not yet defined.

We are still collecting box contents from the manufacturers. Ask us on WhatsApp and we will open one on the shelf and tell you exactly what is inside.

Questions

Do I need a separate hub to control the FIBARO Double Switch 2?

Yes. The module operates over Z-Wave and requires a compatible Z-Wave or Z-Wave Plus gateway or controller for wireless access and automation.

What is the maximum electrical load for each channel?

Under IEC standards, each channel supports up to 6.5 A, with a total combined load not exceeding 10 A. Under UL standards, it supports up to 6 A per channel and 9.5 A overall.

What wall box depth is required for installation?

The module measures 42.5 x 38.25 x 20.3 mm and requires an in-wall switch box with a minimum depth of 60 mm.

Can I keep using my existing physical light switches?

Yes. The unit connects behind the wall plate and works with momentary, toggle, and three-way wall switches, provided the wire length to the switch does not exceed 10 meters.

Does the switch provide dimming?

No. The Double Switch 2 is an on/off relay switch and does not dim connected lighting.

Anything else? Ask us on WhatsApp and we will tell you straight.

From the same shelf

You might also want

All Smart Relays →