
Motion Sensor - Aeotec Tri Sensor
In stock
- Genuine stock. Sourced from authorised distributors, warranty intact.
- Delivered across Tanzania with additional delivery charges.
- Multiple payment options.
How do I pay?
- Cash on delivery — Dar es Salaam only. Pay the rider when it reaches you. Outside Dar es Salaam we ask for payment before we send it.
- Lipa number. M-Pesa, Mixx by Yas (Tigo Pesa), Airtel Money or Halopesa. Message us on WhatsApp and we will send you the number.
- Card — being set up. We are putting card payments in place now, including Apple Pay and Google Pay. Until that is live, please use cash on delivery or a Lipa number.
- VisaVISA
- Mastercard
- American ExpressAMEX
- DiscoverDISC
- Diners Club
- JCB
- UnionPay
- Apple PayPay
- Google PayGPay
Card payments are not switched on yet.
About this product
Three sensors, 45 mm across, 50 grams. Motion to say whether a room is occupied, temperature to run the cooling, and light level so lamps only come on when it is dark. That is most of what a house needs to automate itself.
Motion is accurate to 7 metres. Temperature reads -10 to 50 degrees to within a degree, and can drive a device directly once it passes a level you set, without waiting on the hub. Light reads 0 to 30,000 lux to within 3 per cent.
Sensitivity is adjustable, which is how you stop a pet triggering it. It goes in a corner, on a shelf, on a beam, or into the Aeotec Recessor for a flush ceiling fit.
One CR123A runs it for up to three years. Z-Wave Plus with S2 security. A Z-Wave hub is required.
Description supplied by the manufacturer.
Specifications
| Model | Aeotec TriSensor |
|---|---|
| Sensors | Motion, temperature, light |
| Motion | Accurate to 7 metres, adjustable sensitivity |
| Temperature | -10 to 50 degrees C, plus or minus 1 |
| Light | 0 to 30,000 lux, plus or minus 3 per cent |
| Power | 1 x CR123A lithium |
| Battery life | Up to 3 years |
| Size | 45 mm, 50 grams |
| Mounting | Corner, shelf, beam, or the Aeotec Recessor |
| Radio | Z-Wave Plus |
| Security | S2 |
| Hub | Required. A Z-Wave controller. |
| Product code | 1362 |
| Category | Smart Security |
| Availability | In stock in Dar es Salaam |
What’s in the box
Not yet defined.
We are still collecting box contents from the manufacturers. Ask us on WhatsApp and we will open one on the shelf and tell you exactly what is inside.
Questions
Do I need a hub?
Yes. It speaks Z-Wave only.
How is it different from the MultiSensor 7?
Three sensors instead of six and 7 metres instead of 12. No humidity, ultraviolet or vibration. It is the cheaper way to get occupancy, temperature and light into a room.
Can I stop the cat triggering it?
Sensitivity is adjustable, and aiming it across the room rather than down at the floor helps.
Can it control something without the hub thinking about it?
Yes. It can be associated directly with a device and switch it when the temperature passes a level you configure.
Where does it mount?
Corner, shelf or beam as it comes. The Aeotec Recessor, sold separately, sinks it into a ceiling so only the lens shows.
Anything else? Ask us on WhatsApp and we will tell you straight.




