
Aeotec Smart Switch 6 (ZW096-C16)
In stock
- Genuine stock. Sourced from authorised distributors, warranty intact.
- Delivered across Tanzania with additional delivery charges.
- Multiple payment options.
Payment Options
- Cash on Delivery. You can pay cash at our store on pickup, or pay the rider upon delivery (Dar es Salaam only).
- Pay by Lipa Number
- M-Pesa
- Mixx by Yas
- Airtel Money
- Halopesa

- Selcom

- M-Pesa
- Pay by Card
- Visa
- Mastercard
- American Express
- Discover
- UnionPay
- Visa
- Pay by Apple Pay or Google Pay
- Apple Pay
- Google Pay
- Apple Pay
About this product
The Aeotec Smart Switch 6 (model ZW096-C16) is a plug-in smart switch and energy monitor powered by Z-Wave Plus and Aeotec Gen5 wireless technology. It plugs directly into an existing wall socket to provide wireless on and off scheduling, power automation, and real-time energy reporting for connected home appliances.
Electrical Ratings and Compatibility
This ZW096-C16 unit is configured for European Type E and Type F (Schuko) sockets and plugs, with two round pin receptacles and side earth contacts. It is not compatible with Type C plugs. The switch operates on 230V AC at 50Hz and supports a continuous maximum load of 13A (up to 2990W), with a momentary peak rating of 16A (up to 4160W at 260V). An integrated side USB port delivers DC 5V at up to 1000mA for charging smartphones or other small electronic accessories.
Energy Monitoring and LED Ring
Smart Switch 6 features an illuminated RGB LED ring around the socket perimeter that provides live visual feedback on power consumption. In its default Energy Mode, the ring glows green for loads between 0W and 2000W, yellow from 1500W to 2500W, and red when power draw reaches 2500W to 3000W. When the switch is powered off, the ring shows a soft purple light. Through Z-Wave configuration parameters, the ring can also be set to Momentary Indicate Mode to light up for 5 seconds after a state change, or configured as a scheduled Night Light. The internal power sensor measures consumption starting from 2W, with a reading accuracy of +/-3W under 300W and +/-1% at or above 300W.
Z-Wave Network and Hub Integration
Smart Switch 6 communicates over standard European Z-Wave frequencies (868.42 MHz) with an outdoor transmission range of up to 150 metres (492 feet). It operates as an active network repeater and supports beaming to extend and strengthen communication across nearby Z-Wave mesh devices. The switch requires a compatible Z-Wave or Z-Wave Plus gateway to function remotely or integrate with voice assistants. Pairing supports both standard inclusion and advanced secure inclusion modes via the single onboard action button.
Operating Conditions and Safety
Designed for indoor use in dry locations only, the switch has an operating temperature range of 0u00b0C to 40u00b0C (32u00b0F to 104u00b0F) and operating humidity tolerances between 8% and 80%. Built-in internal protection defends connected equipment against overcurrent and power surges.
Description supplied by the manufacturer.
Specifications
| Model Number | ZW096-C16 |
|---|---|
| Wireless Protocol | Z-Wave Plus (Gen5) |
| Operating Frequency | 868.42 MHz |
| Plug and Socket Standard | EU Type E/F (Schuko)Type C plugs not compatible |
| Rated Input Voltage | 230V AC, 50Hz |
| Continuous Maximum Load | 13A / 2990W |
| Momentary Maximum Load | 16A / 4160W (260V max) |
| Standby Power Consumption | 0.8W maximum |
| USB Output | DC 5V (+/-0.3V), 1000mA |
| Wireless Range | Up to 150 m (492 ft) outdoors |
| Energy Sensor Detection Range | From 2W minimum |
| Energy Meter Accuracy | +/-3W (<300W); +/-1% (>=300W) |
| Operating Temperature | 0u00b0C to 40u00b0C (32u00b0F to 104u00b0F) |
| Operating Humidity | 8% to 80% |
| Product code | I00405 |
| Category | Smart Plug |
| Availability | In stock in Dar es Salaam |
What’s in the box
Not yet defined.
We are still collecting box contents from the manufacturers. Ask us on WhatsApp and we will open one on the shelf and tell you exactly what is inside.
Questions
What kind of socket and plug does the ZW096-C16 model use?
The ZW096-C16 model is fitted with European Type E/F (Schuko) pin connections. It accommodates Type E and Type F plugs, but it is not compatible with Type C plugs.
Does this smart plug require a separate hub?
Yes. To control the switch wirelessly, monitor energy usage, or set automations, you need a compatible Z-Wave or Z-Wave Plus gateway operating on the European frequency (868.42 MHz).
What is the maximum electrical load this switch can handle?
At standard 230V 50Hz operation, it supports continuous loads up to 13A or 2990W. It can withstand momentary maximum loads up to 16A (4160W at 260V).
What does the onboard USB port do?
The built-in USB port supplies DC 5V (+/-0.3V) at up to 1000mA, allowing you to charge phones or power small USB devices directly from the side of the switch.
How does the LED ring indicate power consumption?
In its default Energy Mode, the ring glows green for loads up to 2000W, yellow for loads between 1500W and 2500W, and red between 2500W and 3000W. When the switch output is turned off, the LED turns light purple.
Anything else? Ask us on WhatsApp and we will tell you straight.


